The SUNAIR retractable awning provides sun when you want it and shade when you need it by simply extending the awning. Protect you and your family from the sun's harmful rays. With years of reliable service an awning from SUNAIR becomes an investment rather than an expense.

How do you know your awning is well built?

The SUNAIR is the finest system on the market. Manufactured with pride in the USA, it has received important North American TUV approval for safety and durability. TUV is the only recognized independent testing laboratory in the world with stringent standards for retractable awnings. Some products sold in this country are approved in Europe but not in North America. Before you buy, make sure the product is TUV approved in the United States.

Every SUNAIR is custom made for your personal application like size, color and type of operation. Certain standard parameters apply.

With over 25 years experience SUNAIR is an innovator in the retractable awning industry. We have engineered the most durable yet flexible awning system on the market using the strongest materials and most sophisticated arm design.

Our comittment to quality is unsurpassed. Only the finest materials and workmanship are used to produce an awning superior in quality and strength. The SUNAIR'S strength comes from the use of forged aluminum components. This is the most advanced technology available to retractable awnings today. Our competition uses die-casted or vacuum injection castings. Forging our parts is slightly more expensive but is well worth it knowing we are delivering a product superior in strength and consistency. The maximum 13 ft projection arm awnings can now be made with a continuous safety margin.

Features and Options

Other Options Available

Width: Any width in one inch increments from 8 feet wide to 35 feet wide.

Projection: Maximum projection is 13 feet. Standard projections include, 4' 2", 5' 7", 6' 11", 8' 7", 10' 2", 11' 6", and 13 feet. Custom projections are available.

Frame Colors: Standard powder coat colors include White, Brown, Silver, Forest Green and Beige. Anodized Gold is available at a 15% upcharge. Any color framework can be manufactured for an additional upcharge.

Fabrics: 100% Solution dyed acrylic is standard. Over 200 fabric colors to choose from.

Manual Operation: 3:1 ratio bevel gear with a stop is used on all units up to and including 20 ft wide. A 14:1 worm gear is used on all awning 21 feet wide and over.

Motors: Many sizes of SOMFY motors are available either as motor only operation or with a manual overide (CMO) option.

Hood: An optional protective hood is available if awning is mounted on an open facade. This one piece hood is made of extruded aluminum.

Warranty: 5 year warranty on the frame, fabric, and motors.

Fastners: All nuts and bolts are stainless steel.

Cutout

	Feature	Benefit
Arms	All SUNAIR arm parts under stress are made of forged aluminum. All arms 8'7" and above use three heavy duty steel springs. All projections up to 6'11" use two steel springs.	Forged aluminum is far superior than castings, and 13' projection arms can be made with a continuous safety margin. Heavy duty steel springs are more durable and provide longer life under maximum tension.
Flexibility	SUNAIR's arm uses the strongest materials on the market, yet is engineered for flexibility with a unique two-way movable front arm attachment.	A two-way movable front coupling relieves strain, increases the flexibility in the arm and helps to reduce the possibility of wind damage. This feature is unique in the industry.
Hinge	SUNAIR's hinge uses twin galvanized tinned steel cables over a specially engineered elliptical-shaped radius. The hinge is triple angled.	Twin cables are far superior than a single cable. Cable wear is reduced to a minimum and allows heavier tension in the arm. The elliptical-shaped cable radius increases tension in the springs as the arm is extended where mostly needed. The angles in the hinge allow each arm to flex independently, thus absorbing stress during wind gusts helping eliminate damage.
Gears	SUNAIR uses a heavy duty 3:1 ratio bevel gear with a stop. A 14:1 ratio gear is used on larger widths.	The 3:1 ratio gear is the most efficient gear made. It minimizes the time and effort in retracting and extending the awning. The stop eliminates fabric damage which could occur from over-rolling past the projection of the arm.
Brackets	All SUNAIR brackets are made of heavy duty extruded aluminum electrostatically powder coated to the highest standards (U.S. Pat. #4,641,805).	An extruded part is far superior and stronger than die castings or permanent mold casting. Electrostatic powder coating is more resistant to cracking and chipping than wet lacquer. All SUNAIR components and extrusions are powder coated.

Warranty

Limited Warranty

Sunair Awings are covered by a limited warranty for a period of 10 years form the date of original purchase. This warranty covers SUNAIR awning hardware but does not include fabric or optional motors and electrical accessories used in conjunction with this hardware (ask your dealer for separate warranty information). SUNAIR warrants to the original purchaser that the framework shall be free from defects in material and workmanship for as long as this warranty remains in effect. Under this warranty, SUNAIR agrees to repair at our facility or replace free (at our option) any hardware or component part, not including labor costs, related to the repair in the field.

WARRANTY EXCLUSIONS. SUNAIR assumes no liability for damage due to faulty installation, use or misuse for which the product was not intended or improper maintenance. SUNAIR is not liable for damage to any structure to which the awning is attached, or to property above or near the awning. This warranty does not cover any damage to a structure caused by nature such as acts of God, ice, snow, rain, high winds, vandalism, neglect, fire, use of which the equipment is not intended, weights or loads allowed to accumulate, or normal wear and tear from use. This warranty is in lieu of all warranties, expressed or implied, including warranties of merchantability and fitness for a particular purpose. SUNAIR will not be liable for any consequential or incidental damages. This warranty gives specific legal rights and you may also have other rights that may vary from state to state.

Returns for repairs or replacement: No returns will be accepted without prior written authorization by SUNAIR. A Return Authorization number issued by SUNAIR must accompany all returns, and all unauthorized returns will be refused. The return shipment is to be freight prepaid by the Buyer, and under no circumstances shall the Buyer deduct the value of the returned merchandise or the freight from any remittance due.

THIS WARRANTY IS VOID IF AWNING IS NOT REGULARLY MAINTAINED AND CLEANED